geraalvarez.com

Dot Braided Stainless Brake Hoses, GM/Ford, 7/16-20 Rear

By A Mystery Man Writer

This line kit would be used to connect from hard lines on the rear axle to rear disc calipers when changing from drum to disc brakes. DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8 inch-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16 inch brake line using a 3/8 inch-24 IFM flare nut. Stainless steel braid over Teflon hose.

This line kit would be used to connect from hard lines on the rear axle to rear disc calipers when changing from drum to disc brakes. DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8 inch-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16 inch brake line using a 3/8 inch-24 IFM flare nut. Stainless steel braid over Teflon hose.

Dot Braided Stainless Brake Hoses, GM/Ford, 7/16-20 Rear

Brake hose builder SS

This line kit would be used to connect from hard lines on the rear axle to rear disc calipers when changing from drum to disc brakes. DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8 inch-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16 inch brake line using a 3/8 inch-24 IFM flare nut. Stainless steel braid over Teflon hose.

Dot Braided Stainless Brake Hoses, GM/Ford, 7/16-20 Rear

1978 Ford Mustang II Speedway Motors Brake Lines Parts

DOT Approved Braided Stainless Brake Line Kit: For GM/Ford, 7/16-20 Rear, Convert Drum to Disc Brakes, Stainless over Teflon Hose, 3/8-24 IFF Adapters, Banjo Bolts, Frame Tabs & Clips Included

PERFORMANCE PLUMBING AND BRAKE LINES - Pirate4x4.Com

Tri-Five Brake Lines & Hardware

Goodridge stainless steel brake or clutch hose kits are available to suit all models of car whatever the make. Kits feature the finest quality hose consisting of a PTFE inner with a stainless steel outerbraid. This eliminates the spongy pedal feel under arduous conditions giving greater braking efficiency or clutch operation as well as providing superior resistance to abrasion and corrosion.

Goodridge G-Stop Brake Lines - 14187

Brake Hoses Front, Rear, Universal

DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8-24 IFF

DOT Approved Braided Stainless Brake Hoses, 69-77 GM, 7/16-20, Abrasion Resistant, Leak-Free Seal, Reduced Brake Fade, Easy Installation, Flexible

Ford S/S Braided Brake Lines-PMF-SBK-FRD

Speedway Motors Ford 9 Inch Rearend Bolt-On Rear Disc Brake Kit, Universal Kit

DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8 inch-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16 inch brake line using a 3/8 inch-24 IFM flare nut. Stainless steel braid over Teflon hose. Reduces volumetric expansion of brake lines. Reduces brake fade. Less susceptible to debris than rubber line.

Dot Braided Stainless Brake Hoses, 69-77 GM, 7/16-20