3 3/8” HARDY PERFECT RH. [Circa 1927] 6 3/8 oz. No L.G. Cap. DT-6 + 50 yd. Eunoch design with no ball bearings- only brass bushings on race & stem plate; Ebonite

By A Mystery Man Writer

Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft Flush-mounted bushing with a split taper for reduced mounting width and a

Martin 5050 3 3/8 Taper Bushing, Class 30 Gray Cast Iron, Inch, 3.38 Bore, 7 OD, 5 Length

Condition: VERY GOOD

Condition: Very Good

R 200185. 3 3/8” HARDY PERFECT RH. [Circa 1927] 6 3/8 oz. No L.G. Cap. DT-6 + 50 yd. Eunoch design with no ball bearings- only brass bushings on race

3 3/8” HARDY PERFECT RH. [Circa 1927] 6 3/8 oz. No L.G. Cap. DT-6 + 50 yd. Eunoch design with no ball bearings- only brass bushings on race & stem plate; Ebonite

This KLNJ3 8 ZZ RHP bearing is a Shielded Deep Groove Radial Ball Bearing with a standard radial internal clearance The bearing's dimensions are

KLNJ 3/8 ZZ - RHP Imperial Deep Groove - 3/8x7/8x9/32

JMF Yellow Brass Hose Barb, 3/8 x 1/4

LWB Straight Bushing No. 820800 - 0.875 bore SN1933385 BRASS ships from USA

HO Brass Key Imports NYC - New York Central L-3b 4-8-2 Mohawk 1983 Run – ReSourced Rails

Category: FLY REELS MODERN & CLASSIC

3/8 (0.375) in. Round ID Bearing (R6) - AndyMark, Inc

3/8 (0.375) in. Round ID Flanged Shielded Bearing (FR6ZZ) - AndyMark, Inc